企业新闻

扬中市诺朋电热器材有限公司主要产品:加热器,电加热器,防爆电加热器

« 昆明中铁出厂世界首台大型移动式气压焊轨车奥特朗加速热水器更新换代一机双模 »

Reasons viscous bending die

First, the reasons for bending die produces viscous

1, less rigid mold

2, due to the expansion of the mattress machine injection pressure muster

Second, the knowledge associated

2-1 The role of the cavity because the number of injection pressure will expand that restore the status quo if it is in the mold, but in fact the pressure is still within the mold to maintain a high state of the product is cooled curing, the mold used in the restitution force of great reaction in the mold, making Drilling rig have to open it.

Third, the solution:

3-1 immediately: the management of the injection pressure, do not rise to more than the value should be set.

3-2 long-term: to set the groove, forcing adjustments.

Fourth, due to material differences;

4-1, rigid material difficult point.

V. References matters;

5-1, because when the mold is easy to test mode occurs on the dial gauge attached to the mold, while monitoring side of the slow increase in injection pressure, in this way is better.

5-2, resulting in viscous expansion of the water well drilling rig, remove the decomposition from the injection machine, with the heating method to remove the softened products.

5-3, is due to insufficient rigidity of the mold, from the outside with plywood to strengthen the clamp.
  • 相关文章:

新葡京线上投注 www.xj-tstc.com 发表评论:

◎欢迎参与讨论,请在这里发表您的看法、交流您的观点。

日历

最新评论及回复

最近发表

Powered By Z-Blog 1.8 Walle Build 91204

扬中市诺朋电热器材有限公司专业生产:新葡京线上投注,新葡京线上投注,新葡京线上投注. Some Rights Reserved.